Table of Contents
Advertisement
Installation Instructions
Parallel Port, UART1 Port and VGA Connectors
The parallel port connector can be connected to a parallel device such as a printer.
The serial port UART1 connectors can be connected to a serial port device such as a serial
port mouse.The VGA connector can be connected CRT. You can enable/disable them and
choose the IRQ or I/O address in "Integrated Peripherals" from AWARD CMOS SETUP.
Parallel Port
VGA
UART1
Line-in jack, Microphone-in jack, Speaker-out jack and MIDI/Joystick
Connector
(Available on P2S-A)
The Line-in jack can be connected to devices such as a cassette player or minidisc player to
playback or record. The Microphone-in jack can be connected to a microphone for voice
input. The Speaker-out jack allows you to connect speakers or headphones for audio
output from the internal amplifier.The MIDI/Joystick connector allows you to connect a
game joystick or a MIDI device.
MIDI/Joystick
Line in
Microphone in
Speaker out
Chassis Security Switch (CHSSEC)
The connector connects to the chassis security switch on the case. The system can
detect the chassis intrusion through the status of this connector. If the connector has
been closed once, the system will record the status and indicate the chassis has been
opened. You can monitor or check this information from QDI ManageEasy(optional) soft-
ware.
Indicate signal
GND
CHSSEC
Manual for P2S series
12
02-2-19, 10:59
δÃüÃû-2
Advertisement
Table of Contents
