External Connectors; Ps/2 Keyboard Connector, Ps/2 Mouse Connector; Usb1, Usb2; Parallel Port Connector And Serial Port Connector( Uart1, Uart2) - QDI GeniuX 1 Manual

Table of Contents

Advertisement

Installation Instructions
chapter 2

External Connectors

PS/2 Keyboard Connector, PS/2 Mouse Connector

PS/2 keyboard connector is for the usage of PS/2 keyboard. If using a standard AT size
keyboard, an adapter should be used to fit this connector. PS/2 mouse connector is for
the usage of PS/2 mouse.
PS/2 Mouse Connector
PS/2 Keyboard Connector

USB1, USB2

Two USB ports are available for connecting USB devices.
Top: USB1
Bottom: USB2
Parallel Port Connector and Serial Port Connector (UART1, UART2)
The parallel port connector can be connected to a parallel device such as a printer, while
the serial port connectors can be connected to serial port devices such as a serial port
mouse. You can enable/disable them and choose the IRQ or I/O address in "INTEGRATED
PERIPHERALS" from AWARD BIOS SETUP.
Parallel Port
UART1
UART2

LAN Connector

The onboard LAN supports IEEE802.3 10 BASE-T and 100 BASE-TX. An RJ-45 connector is
provided for twisted-pair cabling. Data transfer speed is automatically determined by the
auto-negotiation protocol. Two LED indicators are provided: LINK and Active.
Active
LINK
RJ-45 connector
for 10/100 Mbps
Manual for GeniuX 1
12

Advertisement

Table of Contents
loading

Table of Contents