Stepeasy - QDI P2S Manual

StepEasy

Because there exists some risk for the CPU chip or the mainboard to change the
CPU frequency , We suggest you read the manual carefully before installing QDI
StepEasy .
When start QDI StepEasy,
other program before run StepEasy.
1. You can click on the 1MHz increase (1MHz decrease) or press shortcut key "+"("-" )to
set the wanted frequency, then click on the "GO" button to get the wanted frequency.
2. Also, you can click on the "Default" button , then click on the "GO" button to get the default
frequency.
3. StepEasy considerately provides users to save his successful CPU tune frequency for
later use .If user wants to save the current frequency , he can clicks on the "Save" button to
realize it.
4. When click on the "Load" button , the saved CPU frequency is obtained immediately.
5. When click on the "Min" button, the utility will minimize to an icon in the right-bottom task tray.
Whenever user clicks the QSE(QDI StepEasy abbr.) icon in the task tray, the utility will be
activated in the current window.
6. The real-time system information such as CPU temperature,CPU voltage and PCI clock will
automatic shown on the ineterface.
Note:
1. QDI StepEasy can only support the QDI motherboard with the clock chip that sup
ports StepEasy.
2. The performance of StepEasy depends on the CPU, DRAM, peripheral equip
ments and the software running.
3. There exist some risks to change the CPU frequency for the CPU or motherboard.
StepEasy can decrease the risks to minimum. But Legend QDI will not be responsible
for any damages caused.
4. If the system halts while running StepEasy, please press the power button until the
system powers down .Restart your computer ,and the system will run in the normal
status.
5.When the system was woken up from S3 or S4 status,please click on the "GO"button
to run at the selected frequency.
δÃüÃû-2
to avoid accident, we recommend you to close your
Manual for P2S series
62 02-2-19, 11:00