QDI P2S Manual page 42

BIOS Description
l Onboard/CNR LAN Auto
Selection
l Init Display First
l Onboard VGA
l Onboard LAN
l IDE HDD Block
Mode
l KBC input clock
l Power On
Function
l KB Power ON
Password
l Onboard FDC
Controller
l Onboard
Serial Port 1/2
l UART Mode Select Normal, IrDA
RxD, TxD Active
l
δÃüÃû-2
If a CNR Interface is enabled, the onboard LAN
will be automatically disabled. Otherwise, the
onboard LAN is enabled.
Onboard The onboard LAN is enabled.
Ext.CNR CNR Interface is enabled.
PCI Slot Initialize the PCI VGA first.
AGP Initialize the AGP first.
Enabled Onboard VGA is enabled.
Disabled Onboard VGA is disabled.
Enabled Onboard LAN is enabled.
Disabled Onboard LAN is disabled.
Enabled Allow IDE HDD to read/write several sectors
once.
Disabled IDE HDD only reads/writes a sector once.
6/8 MHz Set the PS/2 Keyboard input clock as 6/8/12
12/16 MHz / 1 6 M H z .
Button only Power on by power button.
Password Power on with keyboard password.
Enter Enter keyboard password.
Enabled Onboard floppy disk controller is enabled.
Disabled Onboard floppy disk controller is disabled.
3F8/IRQ4 Define the onboard serial port address and
2F8/IRQ3 required interrupt number.
3E8/IRQ4
2E8/IRQ3
Auto Onboard serial port address and IRQ are
automatically assigned.
Disabled Onboard serial port is disabled.
Set UART mode.
ASKIR
Hi, Lo/Lo, Hi Default is recommended.
Lo, Lo/ Hi, Hi
Manual for P2S series
42 02-2-19, 11:00