QDI P2S Manual page 31

Video
Set this field to the type of video display card installed in your system.
EGA/ VGA
CGA 40
CGA 80
MONO
Halt On
This category determines whether or not the computer will stop if an error is detected
during powering up.
No errors
All errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
Memory
This is a Display-Only Category, determined by POST (Power On Self Test) of the BIOS.
Base Memory
Extended Memory
Total Memory
δÃüÃû-2
Enhanced Graphics Adapter / Video Graphic Array. For EGA,
VGA, SEGA, SVGA, or PGA monitor adapters.
Color Graphic Adapter, powering up in 40 column mode.
Color Graphic Adapter, powering up in 80 column mode.
Monochrome adapter, including high resolution monochrome
adapters.
The system boot will not stop for any errors that may be
detected.
Whenever the BIOS detects a non-fatal error, the system will
stop and you will be prompted.
The system boot will not stop for a keyboard error; but it will
stop for all other errors.
The system boot will not stop for a disk error; but it will stop
for all other errors.
The system boot will not stop for a keyboard or disk error, but it
will stop for all other errors.
The POST of the BIOS will determine the amount of base
(or conventional) memory installed in the system.
The BIOS determines how much extended memory is
presented during the POST.
Total memory of the system
Manual for P2S series
31
Chapter 3
02-2-19, 11:00