Introduction - QDI P2S Manual

Introduction

l Two IDE RAID interfaces support two IDE RAID Hard Disks
Supports IDE RAID 0 or IDE RAID 1
l
Onboard LAN
(Available on P2S-L)
10/100 Mbit/sec Ethernet support
l
l 10/100M LAN interface built-in on board
Onboard I/O
l One floppy port supporting up to two 3.5
1.44M/2.88M format
Two high speed 16550 compatible UART (COM1/COM2/COM3/COM4 selective) with
l
16 byte send/receive FIFO
One parallel port supports SPP/EPP/ECP mode
l
Infrared interface
l
All I/O ports can be enabled/disabled in the BIOS setup
l
Onboard Audio
(Available on P2S-A)
AC'97 2.1 Specification Compliant
l
16bit stereo codec
l
Multiple stereo input mixer
l
Mono and stereo volume control
l
Provides onboard Line-in Jack, Microphone-in Jack, Speaker-out Jack with onboard
l
amplifier and MIDI/Joystick Connector
Onboard VGA
(Available on P2S-G)
l Supports onboard VGA(PCI BUS)
AGP Interface
Supports AGP 2.0 including AGP 4x data transfers
l
Advanced features
l PCI 2.2 Specification Compliant
l Provides Trend ChipAwayVirus On Guard
Supports Windows 98/2000/ME soft-off
l
Supports Wake-on-LAN and Wake-on-Modem
l
Supports Keyboard Password Power-on function
l
Supports system monitoring(monitors CPU and system temperatures, system
l
voltages, fan speed)
Providing QDI innovations: RecoveryEasy(When using RAID,RecoveryEasy can not
l
effect), BIOS-ProtectEasy, LogoEasyII, ManageEasy(optional), BootEasy, StepEasy,
SpeedEasy.
δÃüÃû-2
" "
or 5.25 floppy drives with 360K/720K/1.2M/
Manual for P2S series
8 02-2-19, 10:59