QDI P2S Manual page 43

IR Transmission
l
Delay
l UR2 Duplex Mode Half
l Use IR Pins
l Onboard Parallel
Port
l Parallel Port Mode SPP
l EPP Mode Select EPP1.7
l ECP Mode Use
DMA
l PWRON After
PWR-Fail
Game Port
l
Address
l Midi Port Address Disabled
l Midi Port IRQ
δÃüÃû-2
Enabled Enable IR Transmission delay function.
Disabled Disable IR Transmission delay function.
Default is recommended.
Full
IR-Rx2Tx2 Default is recommended.
RxD2, TxD2
378/IRQ7 Define parallel port address and IRQ channel.
278/IRQ5
3BC/IRQ7
Disabled Onboard parallel port is disabled.
Define the parallel port mode.
EPP
ECP
ECP+EPP
Set EPP Mode as EPP 1.7 or EPP1.9 Version.
EPP1.9
3 Set ECP Mode Use DMA 1 or 3.
1
OFF,ON The system remains OFF/ON/Former state when
Former-Sts the AC power supply resumes.
Disabled This option is used to configure Game Port
201,209 Address.
This option is used to configure Midi Port
290 Address.
300
330
5 This option is used to configure Midi Port
10 IRQ.
Manual for P2S series
43
Chapter 3
02-2-19, 11:00