Angelo Po 091CP1E Use And Installation Manual page 28

Lighting
1 - Turn on the appliance's circuit breaker to con-
nect it to the electrical mains.
2 - Fill the well (see page 8).
3 - Turn the knob (A) to setting 1 to turn on the
heating elements at the maximum power and
bring liquids to the boil more quickly.
The mains light (C) comes on.
4 - Turn the knob (A) to one of the other settings,
to reduce the heating element power to a lower
level.
Turning off
1 - Turn off the water supply (see page 8)
2 - Turn the knob (A) to setting 3 to switch off the
heating elements.
3 - Turn off the appliance's circuit breaker to dis-
connect it from the electrical mains.
Filling
The well can be filled in a number of different ways.
IT
IT
Quick no-limits filling.
– Press the knob (B) and turn it to setting 1 to fill the
GB GB
well to the maximum level shown by the mark.
When the water reaches the maximum level, the
heating elements can be turned on and the differ-
DE DE
ent top-up modes can be enabled.
FR FR
Important
After filling, the knob (B) must be turned to
ES
ES
another position as otherwise water may
overflow from the well.
English
SWITCHING THE APPLIANCE ON AND OFF
FILLING AND EMPTYING THE WELL
A
1
B
4
- 8 -
1
2
3
IDM-39615600600.tif
2
3
IDM-39615600700.tif
A C
B