Option Set Up Group; Introduction; Function Prompts - Honeywell EDC 200 Series Product Manual

3. Configuration

3.9. OPTION Set Up Group

3.9 OPTION Set Up Group

Introduction

This group includes selections for Decimal place, Units of temperature, Power frequency, system
staus, lockout attribute, operating level and password.

Function Prompts

Set up Function
Group Prompt
Top Display
PWR
FREQ
Option
DECIMAL
38
7-Segment
Code
Default
Value
Upper Display
HZ
50 HZ
DECI
None
EDC201 / EDC202 / EDC203 Product Manual
Selection 7-Segment
or Range Code
of
Setting
Lower Display
50HZ
50HZ
60HZ
60HZ
NONE
None
1
One
2
Two
Parameter
Definition
Power Frequency
Power Frequency
No Decimal Place
1 decimal place.
ATTENTION Auto-ranging
will occur for selections of
one, two or three decimal
places. For example, should
the instrument be configured
for two decimal places and
the PV exceeds 99.99, then
the display will change to a
single decimal place so that
values of 100.0 and above
can be shown.
2 decimal places.
ATTENTION Auto-ranging
will occur for selections of
one, two or three decimal
places. For example, should
the instrument be configured
for two decimal places and
the PV exceeds 99.99, then
the display will change to a
single decimal place so that
values of 100.0 and above
can be shown.
Revision 2.0
July 2015