Installation of the EDC 200 series consists of mounting and wiring the controller according to the
instructions provided in this section. Read the pre-installation information, check the model number
interpretation, become familiar with your model selection, then proceed with installation.
If the controller has not been removed from its shipping carton, inspect the carton for damage then
remove the controller.
Inspect the unit for any obvious shipping damage and report any damage due to transit to the carrier.
Make sure a bag containing mounting hardware is included in the carton with the controller.
Check that the model number shown on the product agrees with what you have ordered.
EDC201 / EDC202 / EDC203 Product Manual