Technogel MANTE 15-45 Instruction For Installation, Usage And Maintenance page 49

 Washing of machine
Preliminary rinsing of machine
Pour hot water (50/60°C) inside the hopper and press
the washing button and wait for the turbine to stop on
its own after 20 seconds.
Open the outlet with machine still and drain the dirty
water. Repeat 3 times.
Open the flange as in photo B and with the hose
spray, spray inside the refrigerator pipe removing the
last residues of dirt.
The turbine must be assembled when spraying
with the hose spray inside the refrigerator
chamber.
Washing with product
Through the hopper fill about one third of the
refrigerator pipe w ith hot w ater 40° /50° C, adding
some detergent, (E.g. DIVER SEY – SU91 found on
the Italian market, or DIVER SEY – VK3L found on
foreign markets) in product concentration at 5/10% .
Press the washing button and wait for the turbine to
stop on its own after 20 seconds. Repeat 3 times.
Open the outlet with machine still and drain the dirty
water.
Intermediate rinsing of machine
Pour cold water inside the hopper and press the
washing button and wait for the turbine to stop on its
own after 20 seconds.
Open the outlet with machine still and drain the dirty
water. Repeat 3 times.
Open the flange as in photo B and with the hose
spray, spray inside the refrigerator pipe removing the
last residues of dirt.
The turbine must be assembled when spraying with
the hose spray inside the refrigerator chamber.
Turbine dismantling and washing
C
Remove turbine (
dismantle all scraping blades and rear gasket
Carefully w ash all w ith the same liquid and
detergent used previous, rinse w ith running w ater.
Re-assemble all pieces placing them in their seats
and place the turbine back inside the refrigerator
pipe.
During the night leave the flange half open as in
photo B.
49
(to be carried out every working day)
) from the machine and
G
.
A
B
C
G
L