Other Problems And Their Solutions - Technogel MANTE 15-45 Instruction For Installation, Usage And Maintenance

 Other problems and their solutions
PROBLEM
The buzzer of ice-cream ready
continuously sounds upon start-
up
Batch freezing time too long.
Ice-cream does not reach the set
TEMPERATURE value
By pressing the "QUICK
OUTLET" key upon cycle end, the
machine attempts starting but is
unable and after a moment motor
2 alarm appears on screen.
46
CAUSES AND SOLUTIONS
The ice-cream viscosity value is too low.
Increase viscosity value see page 25
The viscosity value is too high.
Lower the viscosity value
Lower the TEMPERATURE value
Wear of scraping blades with probable presence of
ice-cream crust limiting thermal exchange.
Replace the scraping blades.
With ice-cream ready, do not press STOP and then
QUICK OUTLET but directly QUICK OUTLET.
WHO CAN WORK