Volume - Miele PG 8504 Operating Instructions Manual

Volume

A buzzer which is integrated into the control panel can give an acous-
tic signal in the following situations:
- When buttons are pressed (keypad tone)
- Program end
- System messages (information)
Open the systems menu by switching the machine off with the 

button and then with the  button held, switch it back on with the
 button.
Open the menu as follows:

 Settings 
Volume

- Buzzer tones
Setting the buzzer volume for program end and system messages
(information).
Keypad tone
-
Setting the buzzer volume for keypad tone.
Select an option using the  and  arrow buttons.

Confirm your selection with OK.

Keypad tone
When has been selected, you can adjust the volume im-
mediately. When Buzzer tones
lect for which tone,
the volume.
Keypad tone
Quieter
The volume level is represented by a bar chart. On the lowest setting
the buzzer tone is switched off.
Use the arrow buttons  (

Press OK to save the setting.

Buzzer tones
Keypad tone
Buzzer tones
has been selected, you must first se-
Warning Program end
or
Louder
Louder and  (
Settings 
, you would like to adjust
Program end
Quieter Louder
Quieter
) to set the volume.
69