Configuring Ivr Settings - LifeSize Gateway-PRI User Manual

Configuring Gateway Settings
C IVR
ONFIGURING
S
ETTINGS
70 LifeSize Gateway User Guide
Table 3-6 Peer-to-Peer H.323 Call Disconnect Reasons (continued)
Number H.323 Call Disconnect Reason
16 Call deflection has occurred.
17 Access denied.
18 The called party is not registered at the destination.
19 The calling party is not registered.
20 The connection failed and a new one should be made.
21 The called party has no H.245 capabilities.
22 Facility message sends conference list choice.
23 Request to establish H.245 connection.
24 An indication from an endpoint or a gatekeeper to send a new set of tokens
in the tokens and/or cryptoTokens field of the Facility message.
25 Indicates that the purpose of the message is to update feature set
information that was previously sent in the Facility message.
26 Indicates that the purpose of the message is to forward elements of another
message, if that message cannot be sent.
27 Indicates that the purpose of the message is to transport higher-layer
information.
In the IVR section of the Settings tab, you can configure the LifeSize Gateway
to route calls using an Interactive Voice Response (IVR) system.
Procedure
In the LifeSize Gateway interface, on the sidebar, click
1
Gateway (if not already selected).
2 Click the Settings tab.
Click the IVR button.
3
Select the type of IVR functionality:
4