Changing Address Settings; Changing The Administrator Interface Web Server Port - LifeSize Gateway-PRI User Manual

C A
HANGING DDRESS
S
ETTINGS
C
HANGING THE
A
DMINISTRATOR
I W
NTERFACE EB
S P
ERVER ORT
In the Addressing tab, you can change the following address information for the
LifeSize Gateway—IP address information, DNS information and the Ethernet
port speed and duplex.
Procedure
In the Administrator interface, on the sidebar, click Device.
1
Click the Addressing tab.
2
3 To change an IP address setting, do any of the following steps:
In the IP Address field, type the IP address you want
to assign to the LifeSize Gateway.
In the Router IP field, type the IP address of the router
you want the LifeSize Gateway to use.
In the Subnet Mask field, type the subnet mask you
want the LifeSize Gateway to use.
4 In the
DNS Server IP
server that you want the LifeSize Gateway to use.
In the Port settings field, choose the Ethernet port and duplex
5
speed value you want to set.
On the toolbar, click Upload.
6
Related Topics
Viewing Address Settings
Port 80 is the default Administrator interface web server port. For additional
security, you can modify the web server port in the Web tab.
Procedure
In the LifeSize Gateway interface, on the sidebar, click Device.
1
Click the Web tab.
2

Changing the Administrator Interface Web Server Port

field, type the IP address of the DNS
on page 54
Configuring the LifeSize Gateway 55