LifeSize Gateway-PRI User Manual page 125

A NSF S
BOUT ETTINGS
The following topics discuss how you can configure Advanced ISDN Settings:
About NSF Settings
Adding or Editing ISDN Information Elements
Deleting ISDN Information Elements
You can select the Same as Port check box and select another PRI port to
Note
duplicate advanced ISDN settings from that port. When you select this option, you
cannot make any edits to the configuration settings. This option is unavailable in
LifeSize Gateway that support only one PRI port.
The NSF Information Element (IE) feature enables system administrators to
coordinate network and service requirements with service providers. Service
providers supply the information that you enter in the NSF Configuration
dialog box. System administrators can either select any of the pre-configured
NSF settings, or choose to configure their own NSF Information Element using
service provider information.
You can specify the following information in the NSF:
The service providers with which you want their network to work.
The specific network plan and equipment with which you want your
network to work (for example, switches and bandwidth).
The specific services available to their network (for example,1-800
phone numbers).
Instructions are contained in the NSF IE fields of outgoing Q.931 setup
messages in the format shown in
on page 117
on page 127
Figure 3-5.
Configuring the LifeSize Gateway
Configuring Port Settings
on page 123
117