Configuring Ip Connectivity Settings - LifeSize Gateway-PRI User Manual

C IP
ONFIGURING
C
ONNECTIVITY
S
ETTINGS
C
ONFIGURING THE
G R
ATEWAY TO EGISTER
W G
ITH A ATEKEEPER
In the Gateway Identifier field, type the LifeSize Gateway
4
identifier.
In the IP Connectivity section of the Settings tab, you can select the IP
connectivity mode in which the LifeSize Gateway operates, set the address of
the gatekeeper with which the LifeSize Gateway registers, and define the way in
which the LifeSize Gateway interacts with the gatekeeper.
You can configure the IP connectivity mode in the following two ways:
Using a gatekeeper—The LifeSize Gateway registers with a
gatekeeper and uses the gatekeeper for every call (see
the Gateway to Register With a Gatekeeper
Peer-to-Peer—The LifeSize Gateway connects directly to a peer
device without the need for a gatekeeper (see
Gateway for Peer-to-Peer IP Connectivity
Caution Changing the IP connectivity mode setting causes the LifeSize Gateway
to reset.
In the IP Connectivity section of the Settings tab, you can configure the
LifeSize Gateway to register with a gatekeeper.
Procedure
1 In the LifeSize Gateway interface, on the sidebar, click
Gateway (if not already selected).
Click the Settings tab.
2
Click the IP Connectivity button.
3
In the IP connectivity mode field, choose Using gatekeeper.
4
Make one of the following selections:
5
Select the Gatekeeper auto discover and register
option button for the LifeSize Gateway to
automatically search for and attempt to register to a
gatekeeper.
Configuring Gateway Settings
Configuring
on page 63).
Configuring the
on page 66).
Configuring the LifeSize Gateway 63