Deleting Gateway Services; Configuring Port Settings - LifeSize Gateway-PRI User Manual

Configuring Port Settings

D G
ELETING ATEWAY
S
ERVICES
C
ONFIGURING
P S
ORT ETTINGS
106 LifeSize Gateway User Guide
Click Advanced to configure bonding synchronization
2
settings.
The Advanced dialog box appears.
In the Bonding Synchronization field, choose a bonding
3
synchronization setting. Select Prolong only for endpoints that
use non-standard synchronization mechanisms.
Click OK to save your setting and close the Advanced dialog
4
box.
Click the Port Specific tab.
5
In the Enable service in ports section, select the PRI ports that
6
are enabled for this service.
7 Click OK.
The LifeSize Gateway interface uploads your settings to the
services database.
In the Settings tab, you can delete existing services.
Procedure
1 In the LifeSize Gateway interface, on the sidebar, click
Gateway (if not already selected).
Click the Services tab.
2
Select a service and click Delete.
3
In the PRI Port or Serial Port tabs, you can configure physical line settings for
LifeSize Gateway ports. The following topics discuss the settings you can
configure.
Configuring Basic Port Settings
Configuring Port Physical Interface Settings
About Advanced ISDN Settings for PRI Gateways
Configuring Port Call Policies
on page 107
on page 108
on page 116
on page 127