LifeSize Gateway-PRI User Manual page 11

Table 1-1 Gateway Feature Summary (continued)
Feature
Quality of service (QoS)
Dial plan
Direct dialing and call routing The LifeSize Gateway dial plan supports the following
Access control
DTMF translation
Description
The LifeSize Gateway features configurable coding of
media packets to achieve QoS routing priority on the
Internet Protocol (IP) network. The Type of Service
(ToS) bits of the IP datagram header can be configured
for priority level.
The LifeSize Gateway supports a simplified dial plan for
outbound dialing using a single universal prefix. Using
the dial plan, the LifeSize Gateway automatically detects
the capabilities received in the Setup message from the
IP endpoint and sets the same bit rate for the ISDN (or
serial interface) side of the call.
direct dialing and call routing facilities:
Direct Inward Dialing (DID)
Multiple Subscriber
Network (MSN)
Q.931 Sub-addressing
Information Element
Gateway-Serial supports DID in
DCE mode only.
Internal and External Interactive Voice
Response (IVR)
TCS4
Default extension
The LifeSize Gateway features password-controlled
access to the LifeSize Gateway interface. Up to ten
different administrator access profiles can be defined for
the LifeSize Gateway.
The LifeSize Gateway supports translation between
in-band Dual Tone Multi-Frequency (DTMF) signals (on
the ISDN side) and out-of-band H.245 messages (on the
IP side). DTMF translation occurs for voice and video
calls.
About Gateway Features
Functionality 3