Angelo Po 090FT1G Use And Installation Manual page 45

ASSEMBLY APPLIANCES IN BANKS
To assemble appliances in banks (side by side)
proceed as described below.
1 - Pull off the knob (A).
2 - Undo the screws (B) and remove the control
panels (C).
3 - Remove the "insulation retainer" , if fitted.
4 - Apply masking tape to the edges to be placed
side by side.
5 - Apply food-approved sealant to the edges to be
placed side by side.
6 - Place the appliances side by side.
7 - Connect the appliance using the screws and
nuts (D-E).
8 - Remove the excess sealant and the masking
tape.
9 - Apply the sealant to the inside of the lid (F), and
fit it to cover the fixing zone.
10 - Replace the "insulation retainer" , if fitted.
11 - Replace the control panels (C) and the knobs
(A) on completion of the operation.
A variety of optional installation kits are available for
arranging appliances in banks:
G)"Over cupboard" installation kit
H)"Bridge" installation kit
L) Supporting beam kit
G
A
C
D
H
- 19 -
B
F
E
IDM-39614501200.tif
L
IDM-39614501300.tif
IT
GB
DE
FR
ES
English