What This Chapter Contains; You Must Use Series C Point I/O Modules With The 1734-Aent Adapter. Series A Or B Point I/O; Modules Will Not Work With This Adapter - Allen-Bradley Rockwell Automation 1734-AENT User Manua

What This Chapter Contains

1
Install the 1734-AENT Adapter
This chapter describes how to physically install the 1734-AENT adapter on the
DIN rail and connect it to the EtherNet/IP network. The following table lists
where to find specific information.
Topic
Identify Module Components
Mount the Adapter on a DIN Rail Before Installing Modules
Mount (or Replace) EtherNet/IP Adapter to an Existing System
Wiring
Mounting Dimensions
ATTENTION
You must use Series C POINT I/O modules with the
1734-AENT adapter. Series A or B POINT I/O

modules will not work with this adapter.

Chapter
Publication 1734-UM011A-EN-P - February 2004
2
See Page
2-2
2-2
2-3
2-4
2-5