Identify Module Components; Mount The Adapter On A Din Rail Before Installing Modules - Allen-Bradley Rockwell Automation 1734-AENT User Manua

2-2 Install the 1734-AENT Adapter
Identify Module
Components
Mount the Adapter on a DIN
Rail Before
Installing Modules
Publication 1734-UM011A-EN-P - February 2004
Use the following illustration to identify the external features of the POINT
I/O EtherNet/IP adapter.
2
1
Description
1 Ethernet Network RJ45 Connector
2 Network Address Thumbwheel
3 Indicators - Module Status,
Network Activity, Network Status,
and PointBus Status
4 DIN Rail Locking Screw (orange)
Use the following procedure to mount the adapter on a new system before any
I/O modules have been installed.
A
1. Position the adapter (A) vertically above the DIN rail (B).
2. Press down firmly to install the adapter on the DIN rail. The locking
mechanism will lock the adapter to the DIN rail.
3
4
5
8
6
7
43247aent1
Description
5 System Power and Field Power
Indicators
6 Removable Terminal Block (RTB) Handle
7 Removable Terminal Block (RTB)
8 Safety Endcap
B
43520