For Information About; See Page - Allen-Bradley Rockwell Automation 1734-AENT User Manua

What this Preface Contains
Who Should Use
This Manual
Common Techniques
Used in This Manual
1
This preface describes how to use this manual. The following table lists where
to find specific information within this chapter.

For information about

Who Should Use This Manual
Common Techniques Used in This Manual
How To Use This Manual
About the Example Applications
System Components
Where to Find More Information
Terminology
This manual is intended for control engineers and technicians who are
installing, configuring, and maintaining an EtherNet/IP control system that
communicates with POINT I/O through a 1734-AENT adapter. We assume
you have a good understanding of Ethernet and the TCP/IP protocol.
ATTENTION
You must use Series C POINT I/O modules with the
1734-AENT adapter. Series A or B POINT I/O
modules will not work with this adapter.
The following conventions are used throughout this manual:
• Numbered lists provide sequential steps.
• Bulleted lists provide information, not procedural steps.
• Information in bold text identifies menu windows, screen options,
screen names, or areas of the screen, such as dialog boxes, status bars,
radio buttons, and parameters.
The screen captures shown in this manual are pictures
of the software's actual screens.

See page

P-1
P-1
P-2
P-2
P-3
P-4
P-6
Publication 1734-UM011A-EN-P - February 2004
Preface