Angelo Po 0G0BME Use And Installation Manual page 20

SAFETY DEVICES
Although the appliance is complete with all safety
devices, during installation and connection addi-
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
A)Automatic resetting Thermostat; cuts off the
electricity supply in case of overheating.Once the
cause has been eliminated and temperature is
reduced, operation is restored automatically.
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.
SAFETY AND INFORMATION SIGNS
The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data.
B)Burn hazard: watch out for hot surfaces.
C)General hazard: when washing the appliance
do not point pressurised water jets at internal
parts.
D)General hazard: read the manual carefully be-
fore carrying out any procedure.
E)General hazard: all relevant regulations must
be complied with. "Install in compliance with the rele-
vant regulations and use in well ventilated premises
only".
IT
F) General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of fai-
GB
lure to comply with the installation and commissio-
ning instructions".
G)CE marking: indicates that the appliance is com-
DE
pliant with the relevant norms.
FR
OPTIONAL ACCESSORIES
The appliance can be equipped with the following
ES
accessories on request.
A)Containers.
B)Bridging bars for containers.
English
A
A
H
H)WEEE symbol: indicates that the appliance is su-
bject to specific waste disposal regulations.
A
BGN 1/1 BGN 2/3 BGN 1/2 BGN 1/3
TRA 11
B
TRA 12
TRA 16
- 4 -
E
F
G
C
IDM-39603616100.tif
BGN 1/6
IDM-39603606500.tif
B
D