HearthStone Bari 8171 Installation And Operating Instructions Manual page 13

6. Place the front top soap stone panel face down on a soft surface, such as a blanket.
7. Install 2x S12 into left bracket T09.
8. Place 2x S16 washers onto studs on the back of the soap stone panel and install left T09 onto the
right side of the top front soap stone using 2x S13 thumb nuts.
9. Repeat this procedure with the right bracket T09 on the left side of the front top stone panel.
10. Place the bottom front soapstone panel face down on a soft surface, such as a blanket.
11. Install 2x S13 thumb screws onto the studs of the bottom front soapstone panel.
Preassembly of Optional Ceramic Body Front Panels (8171 model only)
1. Locate the front bottom ceramic panel. Place the panel face down on a soft surface, such as a
blanket. Unscrew the thumb nuts from the studs on the rear face of the ceramic. Remove the
hardware bag from the threaded stud.
2. Install the spring and washer from the hardware bag onto the threaded stud. Reinstall thumb nuts to
secure spring and washer in place. Flush the end of the stud to the surface of the thumb nut.
Hearthstone Quality Home Heating Products, Inc ®
13
Bari Model 8171