HearthStone Bari 8171 Installation And Operating Instructions Manual page 11

Optional Outside Air Kit
1. Install gasket to outside air intake frame body
2. Install outside air intake body to rear of stove
using two supplied screws.
Flue Collar Assembly
1. The Bari unit is shipped with the lower section
of the flue collar attached. Locate the rotating
bearings and bearing carrier in the hardware
kit.
2. Put the three metal bearings on the ends of the bearing carrier. Be very careful not to drop these
bearings into the body of the stove!
3. Lay the bearing bracket on top of the lower section of the flue collar.
4. Locate the top section of the flue collar, which is shipped in the firebox, align the top section of the flue
collar over the bearing bracket.
5. Install the provided screws and washers into the threaded holes of the top section of the flue collar to
secure the flue collar in place. The screws should hook under the lip of the lower flue collar and allow
the flue collar to rotate freely.
Hearthstone Quality Home Heating Products, Inc ®
11
Bari Model 8171