HearthStone Bari 8171 Installation And Operating Instructions Manual page 12

If installing a Bari Plus 8172, skip to step 19 of the final assembly section.
Preassembly of optional Soapstone Body Front Panels (8171 model only)
(If using a ceramic body kit, skip to the next section)
1. Locate the Soapstone hardware kit supplied with the soapstone body panels. Compare the
hardware kit to the parts list below.
2. Designate which stones will be the bottom stone panels for the sides, install 2x T08 connection
brackets into the top of the bottom side soapstone pieces. Face the brackets to the inside of the
curved sides. BE VERY CAREFUL WITH ALL SOAPSTONE PARTS, THEY ARE VERY FRAGILE
AND WILL BREAK IF DROPPED.
3. Install 4x S15 silicone caps into the holes on the bottom of the soap stone sides.
4. Remove the threaded studs and hex nuts from the Bari base where the sides will go.
5. Install 2x T10 brackets to the Bari bottom with 2x S14 screws each side. Install the previously
removed threaded studs and hex nuts to the threaded holes on the T10 bracket.
Hearthstone Quality Home Heating Products, Inc ®
12
Bari Model 8171