Delta A3000 User Manual page 42

User Manual
A3000
AC Power Source
Trigger ON ⁄ OFF is output switch for List waveform, output status is current output status.
At this page, there are two modes：
1. To output List waveform
Press
during output is in process：
At this moment, there are three outcomes depend on user input or process status:
 Press
OUT
Menu/
 Press
Home
 Output will stop when List waveform output is completed and stay at Trigger page.
2. To output voltage set at main manual
Press
information as below during output is in process：
At this moment, there are three outcomes depend on user input or process status:
 Press
OUT
Menu/
 Press
Home
 Press
Enter
39 │ www.deltaww.com
to start output List waveform. Screen will show information as below
Enter
ESC/
、 key will stop output and stay at Trigger page.
Cancel
key will stop output and back to main manual.
will start output waveform set at main manual. Screen will show
OUT
ESC/
、 will stop output and stay at Trigger page.
Cancel
will stop output and back to main manual.
will output waveform programmed in LIST mode.