Power On State - Delta A3000 User Manual

User Manual
A3000
AC Power Source
2. Rotate knob to change <OFF>to <TRIG>, press

3.6.4 Power On State

A3000 SERIES may set different operation modes or enable turn on output immediately
next time after AC is on. Output voltage and frequency depend on stored parameter before
AC input is off.
Example of setting AC source to output V=200V and F=50Hz immediately after power of AC
source is turned on.
Save
1. Press
2. Rotate knob to change<Off>to<On>, press
Save
3. Press
34 │ www.deltaww.com
Save Recall Recall
or to move cursor to Output
▲ ▲ ▼ ▼
Save Recall Recall
or to move cursor to Vac.
▲ ▲ ▼ ▼
to confirm change
Enter
to confirm the change
Enter