View Of Gas And Power Connections; Connect Ac Power And Communication Cables - Ametek ta3000R User Manual

A/C Power
Connector
Communication Ports
Rear View showing gases and power connections
Connecting AC Power and Communications Cables
Connect Sample Gas - with Front Injection Panel option
The ta3000 analyzer can be used for process or single gas sample analy-
sis. Single sample analysis is made easier with the Front Injection Panel
option. With this option, access is via the front panel 1/16" VICI fitting
labeled " SAMPLE IN"
Mercury Scrubber
Printer Port
IMPORTANT: Verify that the operating voltage of the instrument
!
matches the available AC power. The ta3000R does not auto select for
CAUTION varying power line voltages.
Correct instrument operating voltage is labeled on the rear panel directly
above the DIN connector / power switch.
Confirm the instrument power switch is OFF ("O" is Depressed)
Connect DIN power cord to instrument
Connect DIN power cord to AC voltage source
CONNECT COMMUNICATIONS CABLES (if applicable)
COM1, COM2, COM3 port, PARALLEL PRINTER port
Gas Connections
Fan
User Manual | 25