Com Ports - Ametek ta3000R User Manual

COM PORTS

Parallel Printer Port LPT1
16 | Model ta3000R Gas Purity Monitor
The following is an example of this output string:
2001-08-16 14:35:00,99,R,S,1,10000000,H2 ,0,CO ,2483, , , , , ,
Com Ports - COM 1, COM 2, and COM 3
All three of these ports are 9-pin male D-type connectors. Pin 2 is used
to transmit data to other equipment. The analyzer uses Pin 3 to receive
data. Pin 5 is a common ground. All other pins are unused.
Parallel Printer Port (LPT1)
The Parallel Printer Port uses a standard 25-pin female D-type connector.
The printer port follows standard parallel printer protocols. The analyz-
ers are compatable with Hewlett Packard printer's model numbers HP-
6xx, HP-7xx, and HP-8xx. Ametek recommends using one of these sug-
gested models.