About This Document; Safety Notes - Ametek ta3000R User Manual

About This Document

This manual is intended as a guide for operation of the ta3000R. This
manual is not intended as a service guide and does not contain service
information. The ta3000R should only be operated by personnel who have
been properly trained in the procedures required for safe operation of
the ta3000R. These considerations are in addition to all site specific safety
procedures.

Safety Notes

Warnings, cautions, and notes contained in any document and in this
User Manual emphasize critical instructions as follows:
!
WARNING
!
WARNING
!
WARNING
!
CAUTION
!
CAUTION
All photographs included in this manual are for example only, and
may not reflect the actual as-purchased configuration of the analyzer.
Improper installation, operation, or service of the analyzer may Re-
sult in permanent damage
If an electrical fire occurs on or inside the analyzer, extinguish it us-
ing class A, B, or C extinguishers. If a purifier fire occurs, extinguish
it using sand or an extinguisher intended for class D (metal) fires
only.
Any purifiers installed in the analyzer are designed for a specific Gas
application. Do not expose these purifiers to any gas other than the
specified application gas. If these purifiers are exposed to gases other
than the specified application gas, they could rapidly and uncontrol-
lably overheat and could cause a fire or permanent damage to the
purifier or the analyzer.
The analyzer must have electrical power, instrument air pressure, and
applicable gas pressure for proper operation. If proper electrical power,
instrument air pressure, or applicable Gas pressure are not supplied,
the analyzer could be permanently damaged and the warranty will be
void.
Operators should not attempt to repair the analyzer. Any repairs at-
tempted without first consulting Ametek customer service shall void
the manufacturer's warranty.
User Manual | 5