Start Up And Operation; Power Up - Ametek ta3000R User Manual

Opening screen at AC power-up
26 | Model ta3000R Gas Purity Monitor
START-UP AND OPERATION

Power Up

: Do not continue with this section until all prodedures in the previ-
ous section have been completed.
Adjust incoming gas supply pressures as specified in the Specifications
pages 14-16 of this manual.
Turn the instrument on by depressing the power DIN switch (1 is de-
pressed) on the back panel of the analyzer. The Power/Status LED on
the front panel and the rear cooling fan should activate and the opening
screen should appear within a few seconds. If any of these does not oc-
cur, turn the power off immediately and contact Ametek customer service
or your local authorized service agent.
ta3000
Gas Analyzer