Installation; Location And Environment - Ametek ta3000R User Manual

Installation of the ta3000R
Unpacking and Inspecting the ta3000R
• Inspect the shipping container exterior for evidence of damage or indications
• Carefully open the shipping container and remove the analyzer. Inspect
• Do not discard the shipping container until installation is complete.
Upon receipt of the ta3000R analyzer, check the interior of the shipping container for the
following items:
• ta3000R Analyzer and Power Cord
• Operating Manual
• Accessories purchased with the ta3000R

Location and Environment

20 | Model ta3000R Gas Purity Monitor

INSTALLATION

In order to have a smooth installation of the ta3000R Analyzer and to get
the maximum performance, out of this instrument, several aspects should
be considered. This guide clarifies the important points for a successful
installation.
Perform the following inspection to assure that the analyzer has not been
damaged during shipment.:
of excess moisture before unpacking.
the exterior of the analyzer for noticeable damage.
If any evidence of damage exists, immediately contact the shipping com-
pany, save the original shipping container, and notify Ametek Process
Instruments as soon as possible for consultation.
1. The area where the ta3000R Gas Analyzer is to be operated should be
clean with minimum particulate matter and dust in the air. Install the
instrument in an area where there are no vibrations to affect the electron-
ics and detector. There should not be any draft directly on the instrument