Super User Mode - Ametek ta3000R User Manual

Super User Mode

How to enter Super User Mode
Super User Temperature & Status Page
36 | Model ta3000R Gas Purity Monitor
Super user mode is intended for those who are highly trained in chro-
matography and for applications of the ta3000 other than on-line process
analysis, or those who wish to change operating parameters.
DO NOT enter super user mode if you have not been factory trained
!
on its use. There are some capabilities in this mode that can / will
by-pass safety mechanisms inherent to Normal User mode. Improper
CAUTION
use of the analyzer in Super User Mode can result in damage to the
instrument and will void the factory warranty.
Please contact Ametek Service about entering the Super User Mode.
Once you have accessed this mode, you will see the Super User mode
name appear in the left corner of the screen. If "Normal User" appears in
the left corner you were already in Super User. The same way is used to
toggle back to Normal User Mode.
Idle Mode
System Settings
Clock: 10-Jan-03 12:34:25
*
Print Chromatograms:
-------------------- System Errors --------------------
Depressing the "Zero" key will manually zero the detector.
Depressing the "Bias" key will toggle the lamp on and off.
Depressing the "Edit" key will provide a new menu of options above the
keys to:
1. Toggle the heaters on and off
2. Change the heater set points
12:34:25
V. 2.70
+
Edit Print Page