Start Up; Connectivity Requirements - Thermo Scientific TSX Series Installation And Operation Manual

Start Up

Connectivity
Requirements
There are two requirements to take full advantage of your
freezers connectivity options:
1. The freezer will need to be connected to a wireless
network with internet connection, the freezer is only able
to use a wireless connection.
a. Refer Table 2 for acceptable network security param-
eters.
b. Speak with your local Information Technology (IT)
group about the correct wireless network and 
password to use.
2. The individual monitoring the unit will need a 
Thermo Fisher Connect account and will need to link the
unit to his/her account via InstrumentConnect™. 
To create a Thermo Fisher Connect account:
a. Use a web browser to open the following URL:
https://apps.thermofisher.com
b. Choose "Create an Account" and follow the 
instructions to establish a new account. 
(Remember your login information for later use.)
c. (Optional) Download the InstrumentConnect 
mobile/tablet application from the AppStore or 
PlayStore.
Note: InstrumentConnect™ is the section of Thermo Fisher
Connect where all connected instruments can be monitored.
To access this section, click the following InstrumentConnect
icon indicated.
10 | Start Up
Note: If you are a user in China, the web client allows you to
switch to that region after logging in or you can log in directly
to the China environment by using 
https://china.apps.thermofisher.com.
Specifications
Table 2. Specifications
Parameter
Default Wi-Fi
transmission frequency
to the cloud.
Wi-Fi protocol
Wi-Fi Security
Wi-Fi Data Rate
Wi-Fi Range
Minimum Required
Wireless Signal
Firewall Ports that must
open
Note: Thermo Fisher Scientific connected devices support
certification validation.
In case of Failure
If your freezer is unable to connect to either a wireless
network or a cloud account, verify your name and password
and attempt to reconnect.
If issues persist, contact your Local Support.
Note: If your network password expires or changes, your
freezer will no longer connect automatically. Ensure to 
manually update your password in the freezer user interface
settings to reconnect. Failure to reconnect within 3 days will
result in data loss.
Specification
Every 5 minutes for sensor
data transmission.
Real-time for alarm events.
2.4 GHZ only: IEEE 802.11B,
IEEE 802.11G, IEEE 802.11N
WPA2PSK
WPA2PEAP(PEAP)
Minimum of 1 Mbps
Up to 30 meters
-67 dbM
123, 443
Ultra Low Temperature Freezers