Thermo Scientific TSX Series Installation And Operation Manual page 19

Connect via Passcode
This option displays a code that must be entered to connect to InstrumentConnect.
Figure 17. Connect to the InstrumentConnect (via Passcode) Screen
The next screen allows you to specify the temperature unit.
After selecting the unit, press the Next button.
Figure 18. Units Setup Screen
The next three screens provide installation instructions.
The first screen provides information regarding power source
and ambient temperature conditions. Press the Next button
to continue through the installation instructions.
Figure 19. Installation Instructions 
(Power and Temperature) Screen
14 | Start Up
The second screen provides information regarding unit
positioning, spacing and leveling. Press the Next button after
reviewing.
Figure 20. Installation Instructions 
(Positioning) Screen
The third screen provides information regarding initial freezer
loading. Press the Next button after reviewing.
Figure 21. Installation Instructions 
(Before Usage) Screen
Ultra Low Temperature Freezers