Thermo Scientific TSX Series Installation And Operation Manual page 27

A success message is displayed once the connection is
established. If the connection fails, either due to an incorrect
Wi-Fi password or network incompatibility, a general error
message is displayed. After 5 seconds, the interface will
return to the previous screen.
If this occurs, check the network status and re-enter the
correct password to establish the connection. (Tip: use the
eye icon to verify the password entry before attempting
connection.)
Refer Connectivity Troubleshooting.
Figure 44. Wireless Setup Error Message 
Screen
Removing Wi-Fi Connection
To remove an established connection first select the network
you wish to disconnect from within the selection screen
shown in Figure 38 and press the Next button. On the
following network information screen, press the Forget
Network button. You will be prompted to confirm your
selection. Once the connection has been disabled, the screen
will return to the Wi-Fi Device selection screen pictured in
Figure 38.
Figure 45. Wireless Setup Connection Message
Screen
22 | Operation
InstrumentConnect
The following screen is displayed when you select the
InstrumentConnect button in Figure 37.
Figure 46. InstrumentConnect Screen
Connect via Mobile Device
Selecting the Connect via Mobile Device option displays a
screen with instructions. Follow the instructions to connect to
InstrumentConnect.
Figure 47. Connect via Mobile Device Screen and
InstrumentConnect Mobile Interface
Screens
Ultra Low Temperature Freezers