Jacking Instructions - Toro Sand Pro 3040 Service Manual

Jacking Instructions

g340625
1. Jack point – front
2. Jack stand point – front
Safety: Jacking Instructions
Mechanical or hydraulic jacks may fail to support the machine and
cause a serious injury.
• Use jack stands to support the raised machine.
• Use only mechanical or hydraulic jacks to lift the machine.
• Do not use the attachment or implement as a jacking point.
1. Park the machine on a level surface, lower or remove any attachments,
engage the parking brake, set the key switch to the O
the key from the key switch.
2. Position the jack securely under the desired jack point:
• Front
To prevent damage to oil cooler, ensure that jack or jack stand
is positioned directly under frame.
Position the jack securely under the frame tube just behind the front
wheel.
• Rear
Position the jack securely under the rear wheel motor.
After raising the machine, use an appropriate jack stand under the machine
frame to support the machine.
DANGER
IMPORTANT
Figure 1
3. Jack point – rear
4. Jack stand point – rear
Page 1–6
position and remove
FF
Sand Pro ® 3040 and 5040
20251SL Rev A