GE Druck ADTS 405 R Mk2 Instruction Manual page 39

Key
HELP
SETUP
F1 SETUP
0 9
000
CLEAR
QUIT
ENTER
CLEAR
ENTER
QUIT
© 2017 General Electric Company – All Rights Reserved.
Table 3-3: Keypad Key Functions
Function
Press HELP then other key for further information.
The settings in the setup menu are only temporary and are lost at power-
down. For more details see Appendix A.1, "Full Setup Menu," on page 108 and
Appendix A.2, "Minimum Setup Menu," on page 111.
This combination of key presses enters the configuration menu. To enter the
configuration menu, press and hold the F1 key, and then press the SETUP key.
The settings in configuration menu are permanent. They are not lost after a
power-down. For more details see Appendix A.3, "Configuration Menu," on
page 112.
Increases the aim value.
Decreases the aim value.
Number entry.
Minus sign for first number entry, 000 (thousand) if not the first number of
entry.
Clear number entry, or quit from menu, or clear warning message.
Complete number entry.
This combination of key presses causes the ADTS to abort. The ADTS with
immediately stop, close the output valves, and perform a power-up restart. To
initiate an abort, press and hold the QUIT/CLEAR key, and then press the
ENTER key.
Operation Quick Reference
ADTS 405 R/F Mk2 Instruction Manual-English | 21