GE Druck ADTS 405 R Mk2 Instruction Manual page 133

Key/selection
F1 SETUP
LOCAL
REMOTE
EXECUTE
TEST
PROGRAM
HELP
000
© 2017 General Electric Company – All Rights Reserved.
[ON]
[OFF]
[Auto run]
[NEXT]
[PREV]
[NONE]
[SEL]
[Erase programs]
[NEXT]
[PREV]
[DEL]
[Results]
[Print/Save]
[PRN]
[SAV]
[NEXT]
[PREV]
[PRN]
data entry
[NEXT]
[PREV]
data entry
Function and Comments
Enters the CONFIG menu.
Enables remote control of the ADTS.
Run test program at power-up.
As [NEXT], but in reverse order.
Select no test program at power-up.
Select the desired test program.
As [NEXT], but in reverse order.
Choose destination for results data.
Print results data.
As [NEXT], but in reverse order.
Help on CONFIG menu.
Enter nudge increment, e.g. 2 ft.
Select the nudge value for:
When in aeronautical units: Altitude, CAS/TAS, Mach,
ROC, Rate CAS, Rt Mach.
When in pressure units: Ps, Pt, Qc, EPR, Rate Ps, Rate Pt,
Rate Qc, Rate EPR.
As [NEXT], but in reverse order.
See CONFIG + for menu hierarchy.
Enter in new security pin code for the CONFIG menu.
Enter 0000 for no pin code required.
ADTS 405 R/F Mk2 Instruction Manual-English | 115
Configuration Menu