Asus Terminator K7 User Manual page 104

PWR Up On External Modem Act [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up
the computer when the external modem receives a call while the
computer is in Soft-off mode. NOTE: The computer cannot receive
or transmit data until the computer and applications are fully running.
Thus connection cannot be made on the first try. Turning an external
modem off and then back on while the computer is off causes an
initialization string that will also cause the system to power on.
Configuration options: [Disabled] [Enabled]
Wake On LAN or PCI Modem [Disabled]
Wake-On-LAN/PCI Modem allows your computer to be booted from
another computer via a network by sending a wake-up frame or signal.
Configuration options: [Disabled] [Enabled]
IMPORTANT:
This feature requires an optional network interface with Wake-On-
LAN and an ATX power supply with at least 720mA +5V standby power.
Wake onUSB for S3/S4/S5 State [Disbled]
This allows you to select whether or not to wake up from S3/S4/S5
by USB device. When selecting [Enable], make sure that jumper JP1A
is placed at 2-3 and the +5VSB standby power is larger than 2.0A.
Otherwise, STR will not work properly.
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. You may
configure your system to power up at a certain time of the day by
selecting [Everyday] or at a certain time and day by selecting [By
Date]. Automatic Power Up does not work if the system is powered
down by operating systems with ACPI feature, such as Windows 98.
Configuration options: [Disabled] [Everyday] [By Date]
104 Chapter 5: BIOS Information