2.2 Detach the Drive Frame
After removing the chassis cover, you must remove the power socket
module from the back panel first, before opening the drive frame.
Follow these steps to detach the
drive frame.
1. Place the chassis on a flat
surface and turn it on its side.
Notice that the power socket
and voltage selector switch
are attached to a metal
module, which is secured to
the rear panel.
2. Remove the screw (located
on the rear panel frame) that
secures the power socket
module.
Module
screw
WARNING!
Do not plug the main power connector into the power socket
until you have completed a system installation.
ASUS Terminator K7 Barebone System
Power Socket and Voltage Selector Switch
Power Socket
Module
17