Asus Terminator K7 User Manual page 59

10. Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-
On-Ring output. The connector powers up the system when a
ringup packet or signal is received through the internal modem
card. NOTE: For external modems, Wake-On-Ring is detected
through the COM port.
IMPORTANT
This feature requires that the Power Up On External Modem Act
parameter is enabled (see 5.5.1 Power Up Control) and that the
system has an ATX power supply with at least 720mA +5V standby
power.
A7VC Wake-On-Ring Connector
11. LCD-TV Headers (18-pin, 18-1 pin LCDTV)
These headers require an optional LCD module for LCD output
or a TV-out module for TV output.
A7VC LCD-TV Headers
ASUS Terminator K7 Barebone System
A7VC
Ring#
®
A7VC
PCIRST#
VSPD1
DD10
GND
®
CLKOUT0
GND
WOR
Ground
2 1
LCDTV
1
TV#/LCD
+5V +5V
VSPCLK1 PAL/NTSC#
GND GND
DD11 BLANK
DD9
DD8 DD7 TVHSYNC
DD6 GND GND
DD5 DD2
LCDTV_ON#
DD0
LTVCL
+3V
TVVSYNC
GND
DD4
DD3
DD1
GND
59