Asus Terminator K7 User Manual page 99

PCI/PNP UMB Resource Exclusion
Reserved MEM Block BASE [No/ICU]
This field allows you to set the base address and block size of an
onboard legacy ISA device that uses any memory segment within
the C800 and DFFF address range. If you have such a device and
you are not using an ICU to specify its address range, select a base
address from the six available options; the Reserved MEM Block
SIZE field will then appear for selecting the block size. If you have
more than one legacy device onboard that requires the use of this
address range, you can increase the block size to 8K, 16K, 32K, or
64K. If you are using an ICU to accomplish this task, leave Reserved
MEM Block BASE to its default setting of [No/ICU]. Configuration
options: [No/ICU] [C800] [CC00] [D000] [D400] [D800] [DC00]
ASUS Terminator K7 Barebone System 99