EdilKamin SCREEN 80 Installation, Use And Maintenance Manual page 27

INSTALLATION INSTRUCTIONS
HOT AIR DISTRIBUTION
Channelling kit
In order to facilitate the assembly of the
hot air distribution system, Edilkamin has pre-
disposed three packages which contain the
components necessary for the various situa-
tions, from the simplest to the most complex.
fireplace installation room alone
kit one
fireplace installation room +
one adjoining room
kit two
fireplace installation room +
two adjoining rooms
kit three
Hot air kit legend
B1 36x9 hot air outlet complete with
adjustable blocker
B2 36x9 hot air outlet without adjustable
blocker
B3 18x9 hot air outlet complete with
adjustable blocker
G1 36x3 air recovery grille complete with
frame
- 27
-
Hot air distribution scheme with the
use of Kit no. 3
The SCREEN fireplace with ventilated air
can heat up to 3 rooms, including the room
in which it is installed. Just above the glass
door, both on the right and on the left, can
be found two balancing blockers with their
relative control lever. The blockers close
the frontal ventilated air outlet, thereby
forcing the air to come out of the channelling
outlets. When the fireplace is hot, the
controls should be operated by means of
the appropriate tool (S) within the cold hand
instrument, rather than using bare hands.
By independently adjusting one blocker or
the other, the user can decide whether to
channel 0%, 50% or 100% of the ventilated
air. The heating modes are summarised in
the figures below.
100 %
Both dampers are open (all the air is emitted
into the room)
LEFT damper is closed-RIGHT damper is open
(50% of the air is emitted into one of the two
adjacent rooms)
LEFT damper is open – RIGHT damper is closed
(50% of the air is emitted into one of the two
adjacent rooms)
Both dampers are closed (all the air is emitted
into the two adjacent rooms and not into the
room where it is installed)