Download
Share
Print this page
EdilKamin PELLKAMIN 8 EVO Manual
  1. Manuals
  2. Brands
  3. EdilKamin Manuals
  4. Indoor Fireplace
  5. PELLKAMIN 8 EVO
  6. Manual

EdilKamin PELLKAMIN 8 EVO Manual

Hide thumbs

Advertisement

Quick Links

PELLKAMIN 8 EVO
WOOD PELLET INSERT
EN
Installation, use and maintenance
page 2

Advertisement

loading

Related Manuals for EdilKamin PELLKAMIN 8 EVO

Summary of Contents for EdilKamin PELLKAMIN 8 EVO

  • Page 1 PELLKAMIN 8 EVO WOOD PELLET INSERT Installation, use and maintenance page 2...

  • Page 2: Table Of Contents

    WOOD PELLET INSERT, tradename EDILKAMIN, models PELLKAMIN 8 EVO SERIAL NUMBER: Nameplate reference Performance declaration: PELLKAMIN 8 EVO (DoP - EK n° 201) Ref. data tag plate Nameplate reference And also declares that: the PELLKAMIN 8 EVO wood pellet insert satisfies the...
  • Page 3 The warranty conditions are given in the warranty certificate Readers of this manual accompanying the product and on website www.edilkamin. This manual is addressed to: com. • those who will use the product at home (“USER”);...

  • Page 4: Safety Information

    Fire hazard. to the warranty certificate inside the product: • blocking the aeration vents and air intakes in neither Edilkamin nor the reseller are liable for the room. DO NOT BLOCK THE AERATION damage resulting from incorrect installation or VENTS OR FLUE.

  • Page 5: General Information

    DIMENSIONS PELLKAMIN 8 EVO (cm) Combustion 73,3 Ø 4 cm Smoke outlet Ø 8 cm Combustion Ø 4 cm The frame is optional 76Lx52h USER/INSTALLER...
  • Page 6 DIMENSIONS OPTIONAL PELLKAMIN 8 EVO (cm) Hatch loading (mm) 75,7 Tray loading 75,7 RACK: Optional USER/INSTALLER...
  • Page 7 TECHNICAL DATA TECHNICAL CHARACTERISTICS in accordance with EN 14785 Best results are achieved with the clean glass system closed. Use the supplied gasket, by the installer. Pellkamin 8 Evo Nominal power Reduced power Available power Yield 89,9 93,9 CO emissions at 13% O...
  • Page 8 TECHNICAL DOCUMENTATION FOR LOCAL SPACE HEATERS ACCORDING TO COMMISSION REGULATION (EU) 2015/1185 AND 2015/1186 Manufacturer Edilkamin S.p.A. Trademak Edilkamin Model Identifier Pellkamin 8 Evo Description Mechanically space heater fired by wood pellets Indirect heating functionality Direct heat output (space heat output) 8,3 kW...

  • Page 9: Unpacking

    UNPACKING PREPARATION AND UNPACKING In the stove you will find: The packaging materials are neither toxic nor noxious The packaging materials are neither toxic nor noxious • remote control, and do not require special disposal. and do not require special disposal. •...
  • Page 10 UNPACKING DO NOT REMOVE THE PRODUCT FROM THE PALLET BEFORE LOOSENING THE SCREWS. TO REMOVE THE STOVE FROM THE PALLET: TO REMOVE THE STOVE FROM THE PALLET: • • Remove the screws Remove the screws INDICATIVE DRAWINGS, NOT ALWAYS REFERRING TO THE SPECIFIC MODEL. INSTALLER...
  • Page 11 UNPACKING PACKAGING The packaging includes a useful inspection hatch to check the status of the product.On receipt, check and immediately notify the retailer of any anomalies. The packaging comprises a single item containing the following: Description Quantity Inserts Hand (A) for hinged-type opening of the hearth door Hand (B) for opening the product to charge and clean INDICATIVE DRAWINGS, NOT ALWAYS REFERRING TO THE SPECIFIC MODEL.

  • Page 12: Installation

    • The appliance may not be installed in a bedroom, Contact the authorised Edilkamin Technical Assistance bathroom or in the same room as other equipment Centre. which draws air for combustion from the room itself, or in any area with an explosive atmosphere.
  • Page 13 INSTALLATION FLUE SYSTEM FLUE SYSTEM • be certified, with a chimney plate if metal ( ( Fumes duct, flue and chimney pot Fumes duct, flue and chimney pot) ) • be of uniform cross section or vary in cross section Thsi chapter has been drawn up pursuant to European only immediately after the outlet, not at some mid regulations EN 13384, EN 1443, EN 1856 and EN...
  • Page 14 INSTALLATION THE FLUE THE FLUE: EXTERNAL AIR INTAKE Further to the general prescriptions for the fumes duct In general, we suggest two ways for ensuring a proper and flue, the flue: : flow of combustion air. • must serve solely to exhaust fumes •...
  • Page 15 The electrical system must be compliant; check the operation of the earth in particular. Edilkamin is not responsible for malfunctions resulting from an improperly earthed system. The power line must be of adequate section for the power of the appliance.
  • Page 16 INSTALLATION The insert is supplied with a base plate (A) complete with smoke duct (B) and primary air duct (C). To fit, proceed as follows: • Check for a power outlet on the back of the insert, so that it is accessible once installation is complete. •...
  • Page 17 INSTALLATION BE CAREFUL REMOVE THE PART AS SHOWED BELOW Tray loading WITHOUT OPTION HATCH LOADING INSTALLER...
  • Page 18 INSTALLATION COMPENSATION VENTS KIT COMPENSATION VENTS KIT Internal mantel ventilation grilled External intake Recycled air intake inspection * Provide two aeration grilles (area larger than 100 cm2), They must be installed: one below and one above They must be installed: one below and one above the first one under the insert and the second positioned the hearth mouth.
  • Page 19 INSTALLATION FACINGS, GATHER HOOD AND VENTS FACINGS, GATHER HOOD AND VENTS CHECK CAREFULLY THE PRODUCT CHECK CAREFULLY THE PRODUCT BEFORE COMPLETE. BEFORE COMPLETE. Face the product only after having completed the Face the product only after having completed the following steps: following steps: •...

  • Page 20: Instructions For Use

    USER INSTRUCTIONS FIRST IGNITION (COMMISSIONING) FUEL PHASES Use Class A1 wood pellets conforming to the UNI Use Class A1 wood pellets conforming to the UNI Make sure you have read and understood this Make sure you have read and understood this EN ISO 17225-2 standard or similar local regulations EN ISO 17225-2 standard or similar local regulations manual:...
  • Page 21 USER INSTRUCTIONS BE CAREFUL REMOVE THE PART AS SHOWED BELOW EXTRACTION OF THE INSERT , COLD, WITHOUT OPTIONAL CAUTION: BEFORE PROCEEDING, MAKE SURE THAT THE INSERT IS FIXED TO THE BASE. To extract the insert, proceed as follows: • Open the door and lift the slide lock (F). •...
  • Page 22 Emergency panel placed frontally at the bottom under the door • By purchasing the Edilkamin optional elements included in the range: • LTE ADVANCED 4G telephone dialer: used for managing a few functions, even outside of home, by means of a...
  • Page 23 (operations not protected by password) • installer (operations with dedicated password because any errors can jeopardise the product’s operations and SECURITY) • Edilkamin technical assistance centre (operations with dedicated password because any errors can jeopardise the product’s operations and SECURITY) USER...
  • Page 24 This only refers to the remote control, not the product itself. In normal use, the remote control’s batteries should last a year. This duration is for illustrative purposes only. Edilkamin and the reseller will not consider claims for battery life under any circumstances. not used on this product...
  • Page 25 USER INSTRUCTIONS: REMOTE CONTROL current room temperature target room temperature Bluetooth communication present between the stove and the circuit board. If there is no communication, the symbol disappears. On only if the battery is running out. The power level supplied by the batteries is near the limit for powering the remote control.
  • Page 26 USER INSTRUCTIONS: REMOTE CONTROL Visualisation of the status of the fan(s). If the activation fume temperature has not been reached, it will not display any symbol. SPEED OFF SPEED 1 SPEED 2 SPEED 3 SPEED 4 SPEED 5 AUTOMATIC The stand-by function (where present and active) has caused the product to switch off. It does NOT indicate that the function is enabled.
  • Page 27 USER INSTRUCTIONS POSSIBLE STATUSES of the product - OFF STATE The product is “deactivated” and will not produce heat due to manual switching off using the ON/OFF button on the remote control or due to an external contact (timer, telephone dialler). From the OFF page, press the ON/OFF button for 3 seconds to access the ON page.
  • Page 28 USER INSTRUCTIONS POWER ON/POWER OFF These operations will take a few minutes, during which the flame must appear or switch off. Simply wait without taking any action. The ON/OFF button is used to manually start the on or off phase. During the switch-on, the display will show the status (CLEANING;...
  • Page 29 USER INSTRUCTIONS AUTOMATIC and MANUAL setting Press the AUTO/MAN button for a few seconds to switch from manual to automatic mode or vice versa. AUTOMATIC MANUAL In AUTOMATIC mode: Setting of the room temperature (read by the remote control, which should be located in the room where the product is installed).
  • Page 30 USER INSTRUCTIONS - FAN ADJUSTMENT The setting can be made with the stove turned OFF or ON. If the backlight is switched off, it can be activated by pressing any button. Pressing the button will make SET flash and, instead of the room set-point, the number of the fan being modified will appear (F1).
  • Page 31 USER INSTRUCTIONS - EASY TIMER (deferred switching on/off) This function switches the product on/off after a set period from activation of the function. This is convenient if you go to bed and want the product to switch on/off after a few hours (maximum 12 hours). The Easy Timer function can be activated by pressing the dedicated button.
  • Page 32 USER INSTRUCTIONS TIMER Timer regulation is possible by MENU If the product is in automatic mode, the product works at room temperature otherwise it works with the power. Pressing the button allows for switching from Temperature Timer to Power Timer and vice versa. Pressing the button activates or deactivates the timer (pre-programmed from the app or remote control).
  • Page 33 USER INSTRUCTIONS - MENU It can be accessed by pressing the button and the first Menu item will appear. The menu items can be scrolled with the buttons and the item can be entered with the button. The menu items appear in the following order: 01 STAND-BY 02 PELLET LOAD 03 CHRONO PROG.
  • Page 34 USER INSTRUCTIONS - STAND-BY When the Stand-by function is active, in the automatic and timer modes, the product switches off once the temperature set-point is reached and turns on again when the room temperature drops below the chosen value. When the Stand-by function is not active, the product sets itself to minimum power when the temperature set-point is reached.
  • Page 35 USER INSTRUCTIONS Pressing the button with the value ON activates the function and the display will propose to choose how many minutes must pass before the devices switches off in stand-by mode. (es: 5 minutes) buttons can be used to modify the time and the button to confirm.
  • Page 36 USER INSTRUCTIONS - PELLET LOAD Allows you to load pellets after the screw feeder has emptied. Useful for the technician during the initial start-up. Available only in the OFF status. Any attempt to activate the function in other statuses will not be allowed. To access the function from the main menu (as indicated in the Menu paragraph above), press the M button.
  • Page 37 USER INSTRUCTIONS - CHRONO PROG. (TIMER) To access the function from the main menu (as indicated in the Menu section above), press the MENU button. The menu items can be scrolled with the buttons and the item can be entered with the button.
  • Page 38 USER INSTRUCTIONS Choose the day of the week by scrolling the buttons (you will simultaneously see the programme for that day) and confirm with the button. The cursor (rectangular and 2 pixels wide) positions itself on 00:00. The time at the top RH shows the start of the time slot. The word SET appears with the pre-set level for that time slot.
  • Page 39 USER INSTRUCTIONS buttons can be used to modify the temperature levels (OFF – T1 and T2) or the power levels (OFF – P1 and P5). After reaching 23:30 you must go backwards. If you shift by pressing and holding the buttons for more than 2", you copy the previous level onto the next level with a 1/2 h frequency per second.
  • Page 40 USER INSTRUCTIONS The day of the week will flash again and you can move to the next day Confirm with the following button Pressing the button briefly allows you to exit the programming, but the programme will not activate. To activate it, you must briefly press the button again from the main page.
  • Page 41 USER INSTRUCTIONS - TEMPERATURE SETTING FOR TIMER T1 – T2 To access the function from the main menu (as indicated in the Menu section above), press the MENU button. The menu items can be scrolled with the buttons and the item can be entered with the button.
  • Page 42 USER INSTRUCTIONS - DATE AND HOUR (TIME) Can be used to set the current date and time. To access the function from the main menu (as indicated in the Menu section above), press the MENU button. The menu items can be scrolled with the buttons and the item can be entered with the button.
  • Page 43 USER INSTRUCTIONS - °C/°F SETTING of the temperature scale (centigrade or Fahrenheit degrees) To access the function from the main menu (as indicated in the Menu section above), press the MENU button. You can scroll the menu items with the buttons and enter the item with the following button After entering the °C/°F function, the name of the function appears on the first line of the status bar and the current value on the second line.
  • Page 44 USER INSTRUCTIONS - LANGUAGE SETTING Selects the language. To access the function from the main menu (as indicated in the Menu section above), press the MENU button. You can scroll the menu items with the buttons and enter the item with the following button After entering the Language Menu item, the name of the function appears on the first line of the status bar and the current value on the second line ITALIANO that means Italian.
  • Page 45 USER INSTRUCTIONS - INFO These readings should only be done when requested by the technician. The technician understands the diagnostic meaning of the messages and values, and may ask you to read them to him/her if you experience problems. To access the function from the main menu (as indicated in the Menu paragraph above), press the MENU button. You can scroll the menu items with the buttons.
  • Page 46 USER INSTRUCTIONS - DATA Information of the product’s operation log can be scrolled with the buttons. To access the function from the main menu (as indicated in the Menu paragraph above), press the MENU button. The menu items can be scrolled with the buttons and the item can be entered with the button.
  • Page 47 USER INSTRUCTIONS - ALARM LOG Information of the product’s operation log can be scrolled with the buttons. The alarms are arranged from the most recent to the oldest. ALARMS ALARMS ALARMS Exit with the following button - SCREW FEEDER ON-OFF FOR THE TECHNICIAN ONLY (ON INDICATION OF THE AFTER-SALES DEPARTMENT) AUGER MOT.
  • Page 48 USER INSTRUCTIONS - TECHNICAL MENU (for TECHNICIANS ONLY) Accessible only to an authorised technician with the appropriate password. NOTES You must enter with the installer password (1111) and access the inappropriate changes can cause installer parameters/settings only the product to seize up Flame type (INST) Pellet type (INST) Chimney sweep function (INST)
  • Page 49 USER INSTRUCTIONS - PELLET TYPE You can scroll the Technical Menu items with the buttons until you reach “PELLET TYPE” PELLET TYPE You can enter the Pellet Type setting with the following button and modify the value with the buttons. Use the button to exit and return to the Technical Menu INSTALLER...
  • Page 50 USER INSTRUCTIONS - CHIMNEY SWEEP FUNCTION (ONLY WITH THE PRODUCT ON) It can be used to conduct the requested checks agreed upon with the technician Scroll between the Nominal (Max) or Minimum (Min) function using the buttons and modify the value from OFF to ON with the buttons.
  • Page 51 USER INSTRUCTIONS - PARAMETERS PLEASE REFER SERVICE SUGGESTIONS You can scroll the Technical Menu items with the buttons until you reach “PARAMETERS”. PARAMETERS Enter the Parameters section with the button: the first parameter will be displayed. PLT LEVEL SENSOR Scroll the parameters with the buttons and modify the value with the buttons.
  • Page 52 USER INSTRUCTIONS: SAVE PANE On-Off button button button SAVE PANEL can temporarily make up for the absence of a remote control or smartphone, or other product management systems. Controls the product starting from the pressing of the buttons. When the remote control or smartphone re-establishes the communication and sends a command to the product, the remote control or smartphone will once again resume control of the product.
  • Page 53 USER INSTRUCTIONS: SAVE PANEL Below please find a description of when the LEDS will light up: USER...

  • Page 54: Maintenance

    MAINTENANCE DAILY MAINTENANCE These jobs should be done with the product off, cold and preferably disconnected from the mains. • A suitable vacuum cleaner is required. • The entire procedure takes just a few minutes. 1. Open the combustion chamber door (P) using the removable handle provided. Remove composant (3) 2.
  • Page 55 MAINTENANCE WEEKLY MAINTENANCE • Clean the combustion chamber (with brush). • Vacuum the hose located near the electrical resistan- ce (5). • Remove the ceiling (6)and tip the residue into the ash drawer. N:B: reposition the ceiling with the arrow pointing outwards •...
  • Page 56 You should clean the chimney system at least once a Using non-original spare parts may damage the year (check local regulations for details). appliance and relieves Edilkamin of all liability for damage resulting therefrom. If you fail to regularly clean and inspect the system,...

  • Page 57: Note

    NOTE EXPANSIONS EXPANSIONS ODOURS On first ignition, there may be a slight smell of paint, As with all appliances, a wood appliance heats up As with all appliances, a wood appliance heats up which will disappear in a short time. and cools down during the various operating stages.

  • Page 58: Troubleshooting

    IN THE EVENT OF PROBLEMS If problems occur, the product shuts itself off automatically. The display will show the reason (see below). Do not disconnect from the power supply. To restart the product, wait for the switch-off sequence to terminate and then press the ON/OFF button of the remote control or the simplified switch-on button.
  • Page 59 IN THE EVENT OF PROBLEMS MESSAGE PROBLEM SOLUTION • Check that the combustion chamber door is closed displays when the combustion • Check the regular maintenance of the product air intake is below the set level • Check that smoke discharge and combustion air ducts are clean.
  • Page 60 IN THE EVENT OF PROBLEMS MESSAGE PROBLEM SOLUTION Room temperature probe failure. The product is operating • Contact the technician in manual mode. Ducting room temperature probe (if present) fault. The • Contact the technician product is operating in manual mode.
  • Page 61 MAINTENANCE: A spanner symbol will appear on the display after 2,000 hours of operation. The product is working, but it must be serviced by an authorised Edilkamin technician. LACK OF COMMUNICATION: In case of a prolonged lack of communication between the stove and the remote control, the Bluetooth transmission icon will disappear as well as the icons transmitted by the circuit board to the remote control.
  • Page 62 IN THE EVENT OF PROBLEMS PELLETS RESERVE INDICATOR: The function is only available if the pellet level sensor is installed and has been activated. When the level sensor intervenes, the circuit board emits a single “beep” (in any switch-on or work status) and the moving reserve symbol will appear on the display.
  • Page 63 IN THE EVENT OF PROBLEMS After an interval of roughly 20/30 minutes, which varies depending on the model, the stove switches off due to a shortage of pellets. If the user reloads the stove before the start of the switch-off procedure, the symbol disappears and the stove resumes its normal operation.
  • Page 64 *942237-GB* w w w . e d i l k a m i n . c o m cod. 942237-GB 10.21/A...