Removing And Installing Cap/Diffusion Plate; Removing And Installing Cap/Diffusion Plate Of Switch Without Switch Guard - Sony ICP-X7000 Installation Manual

1-7. Removing and Installing Cap/Diffu-
sion Plate
1-7-1. Removing and Installing Cap/Diffusion
Plate of Switch without Switch Guard
1. Hook the supplied Cap pull tool to the two grooves of
the cap/diffusion plate.
2. Hold and push portion A (two locations) near the end
of the Cap pull tool in the direction of arrow B, and
pull out the cap/diffusion plate.
n
If you hold above portion A (two locations) near the end of
the Cap pull tool, the tip of the Cap pull tool does not reach
the groove of the diffusion plate and the cap/diffusion plate
may not be pulled out.
B
A
Groove
Cap/diffusion plate
ICP-X7000
Cap pull tool
A
B
Groove
OK
Cap pull tool
A
A
B
Grooves of the
diffusion plate
3. Install the removed parts by reversing the steps of
removal.
NG
Cap pull tool
B
B
Grooves of the
diffusion plate
1-21 (E)
B