Sony ICP-X7000 Installation Manual page 36

3. Loosen the screws on the rear of the right and left
adaptors and adjust the length of the adaptor according
to the depth of the rack.
(The illustration below shows the left adaptor.)
Adaptor
Rail portion
t
Maximum depth of adaptor: 750 mm
Minimum depth of adaptor: 595 mm
4. Attach the right and left adaptors to the rack complete-
ly using the specified six screws.
(The illustration below shows the left adaptor.)
Rack
B4 10
4U
1U
Adaptor
MKS-X7700: 4U
MKS-X2700: 1U
1-28 (E)
B4 6
Adaptor
31.75
Rack
B4 10
31.75
Unit: mm
5. Tighten the screws (B4 x 6: two screws each on the
right and left) for adjusting the length of the adaptor
completely (the screws that were loosened in step 3).
6. Align the groove of the rack tool at the side of the
equipment with the rail, and slide the equipment to the
rear.
t
The rack tools are hooked on the rails as shown below.
Rack tool
Rail
Rack tool
Rail
ICP-X7000