Installing The Extension Adaptor - Sony ICP-X7000 Installation Manual

1-6. Installing the Extension Adaptor

t
. The panel is tilted when the extension adaptor (MKS-
X7075) is shipped as in the case of main panel.
To install the panel on a level with the adjustment con-
sole, change the tab rack tool installation position.
. Extension adaptors can be used in connection. For how
to couple extension adaptors, contact your local Sony
Sales Office/Service Center.
Prepare the following screws and washers.
. Screw (B5 x 8): 4 pcs
. M5 washer (Sony part number: 7-688-005-11): 4 pcs
1. Remove the right and left module covers.
2. Remove the four screws (PSW3 x 6) to detach the cap
(L) and cap (R).
Module cover
PSW3
Cap (L)
ICP-X7000
6
Module cover
PSW3 6
Cap (R)
Extension adaptor
3. Place the extension adaptor on the adjustment console.
4. Secure the extension adaptor to the adjustment console
with screws and washers.
5. Install the cap (L) and cap (R) with four screws.
6. Attach the module covers.
Module cover
PSW3
Cap (L)
B5 8
Washers
Adjustment console
7. Connect the AC adaptor and LAN cable, and clamp
them with two clampers, after installing the extension
adaptor.
6
Module cover
PSW3 6
Cap (R)
B5 8
Washers
Extension
adaptor
1-19 (E)